FM / library

/usr/share/doc/python2-docs/html/_sources/library/

/usr/share/doc/python2-docs/html/_sources/library

Name	Size	Mode	Actions
2to3.rst.txt	14647	0644	edit dl rm
abc.rst.txt	7219	0644	edit dl rm
aepack.rst.txt	4257	0644	edit dl rm
aetools.rst.txt	3532	0644	edit dl rm
aetypes.rst.txt	4257	0644	edit dl rm
aifc.rst.txt	7086	0644	edit dl rm
al.rst.txt	5309	0644	edit dl rm
allos.rst.txt	695	0644	edit dl rm
anydbm.rst.txt	4111	0644	edit dl rm
archiving.rst.txt	424	0644	edit dl rm
argparse.rst.txt	74685	0644	edit dl rm
array.rst.txt	10524	0644	edit dl rm
ast.rst.txt	10111	0644	edit dl rm
asynchat.rst.txt	9206	0644	edit dl rm
asyncore.rst.txt	12937	0644	edit dl rm
atexit.rst.txt	3910	0644	edit dl rm
audioop.rst.txt	10395	0644	edit dl rm
autogil.rst.txt	1015	0644	edit dl rm
base64.rst.txt	6252	0644	edit dl rm
basehttpserver.rst.txt	10404	0644	edit dl rm
bastion.rst.txt	2611	0644	edit dl rm
bdb.rst.txt	12456	0644	edit dl rm
binascii.rst.txt	6508	0644	edit dl rm
binhex.rst.txt	1910	0644	edit dl rm
bisect.rst.txt	5415	0644	edit dl rm
bsddb.rst.txt	7575	0644	edit dl rm
bz2.rst.txt	8064	0644	edit dl rm
calendar.rst.txt	11282	0644	edit dl rm
carbon.rst.txt	15956	0644	edit dl rm
cd.rst.txt	11974	0644	edit dl rm
cgi.rst.txt	22853	0644	edit dl rm
cgihttpserver.rst.txt	2788	0644	edit dl rm
cgitb.rst.txt	2874	0644	edit dl rm
chunk.rst.txt	4955	0644	edit dl rm
cmath.rst.txt	7647	0644	edit dl rm
cmd.rst.txt	8565	0644	edit dl rm
code.rst.txt	7115	0644	edit dl rm
codecs.rst.txt	66966	0644	edit dl rm
codeop.rst.txt	3774	0644	edit dl rm
collections.rst.txt	41448	0644	edit dl rm
colorpicker.rst.txt	913	0644	edit dl rm
colorsys.rst.txt	1819	0644	edit dl rm
commands.rst.txt	2595	0644	edit dl rm
compileall.rst.txt	4678	0644	edit dl rm
compiler.rst.txt	37464	0644	edit dl rm
configparser.rst.txt	19607	0644	edit dl rm
constants.rst.txt	2328	0644	edit dl rm
contextlib.rst.txt	6012	0644	edit dl rm
cookie.rst.txt	9543	0644	edit dl rm
cookielib.rst.txt	27875	0644	edit dl rm
copy.rst.txt	3351	0644	edit dl rm
copy_reg.rst.txt	2329	0644	edit dl rm
crypt.rst.txt	2292	0644	edit dl rm
crypto.rst.txt	355	0644	edit dl rm
csv.rst.txt	22757	0644	edit dl rm
ctypes.rst.txt	90513	0644	edit dl rm
curses.ascii.rst.txt	9046	0644	edit dl rm
curses.panel.rst.txt	2740	0644	edit dl rm
curses.rst.txt	74877	0644	edit dl rm
custominterp.rst.txt	570	0644	edit dl rm
datatypes.rst.txt	864	0644	edit dl rm
datetime.rst.txt	74679	0644	edit dl rm
dbhash.rst.txt	3865	0644	edit dl rm
dbm.rst.txt	3117	0644	edit dl rm
debug.rst.txt	446	0644	edit dl rm
decimal.rst.txt	70926	0644	edit dl rm
development.rst.txt	640	0644	edit dl rm
difflib.rst.txt	30716	0644	edit dl rm
dircache.rst.txt	1813	0644	edit dl rm
dis.rst.txt	23248	0644	edit dl rm
distribution.rst.txt	426	0644	edit dl rm
distutils.rst.txt	1958	0644	edit dl rm
dl.rst.txt	3392	0644	edit dl rm
doctest.rst.txt	73985	0644	edit dl rm
docxmlrpcserver.rst.txt	3802	0644	edit dl rm
dumbdbm.rst.txt	2841	0644	edit dl rm
dummy_thread.rst.txt	1058	0644	edit dl rm
dummy_threading.rst.txt	799	0644	edit dl rm
easydialogs.rst.txt	10346	0644	edit dl rm
email-examples.rst.txt	1271	0644	edit dl rm
email.charset.rst.txt	9654	0644	edit dl rm
email.encoders.rst.txt	2376	0644	edit dl rm
email.errors.rst.txt	4006	0644	edit dl rm
email.generator.rst.txt	6132	0644	edit dl rm
email.header.rst.txt	7531	0644	edit dl rm
email.iterators.rst.txt	2421	0644	edit dl rm
email.message.rst.txt	25217	0644	edit dl rm
email.mime.rst.txt	9917	0644	edit dl rm
email.parser.rst.txt	10327	0644	edit dl rm
email.rst.txt	16111	0644	edit dl rm
email.utils.rst.txt	6475	0644	edit dl rm
ensurepip.rst.txt	5022	0644	edit dl rm
errno.rst.txt	6708	0644	edit dl rm
exceptions.rst.txt	18343	0644	edit dl rm
fcntl.rst.txt	7361	0644	edit dl rm
filecmp.rst.txt	5348	0644	edit dl rm
fileformats.rst.txt	302	0644	edit dl rm
fileinput.rst.txt	7417	0644	edit dl rm
filesys.rst.txt	806	0644	edit dl rm
fl.rst.txt	17646	0644	edit dl rm
fm.rst.txt	2699	0644	edit dl rm
fnmatch.rst.txt	3104	0644	edit dl rm
formatter.rst.txt	13245	0644	edit dl rm
fpectl.rst.txt	4171	0644	edit dl rm
fpformat.rst.txt	1747	0644	edit dl rm
fractions.rst.txt	5297	0644	edit dl rm
framework.rst.txt	11444	0644	edit dl rm
frameworks.rst.txt	378	0644	edit dl rm
ftplib.rst.txt	15720	0644	edit dl rm
functions.rst.txt	75554	0644	edit dl rm
functools.rst.txt	7448	0644	edit dl rm
future_builtins.rst.txt	2010	0644	edit dl rm
gc.rst.txt	9014	0644	edit dl rm
gdbm.rst.txt	4882	0644	edit dl rm
gensuitemodule.rst.txt	3113	0644	edit dl rm
getopt.rst.txt	6670	0644	edit dl rm
getpass.rst.txt	1876	0644	edit dl rm
gettext.rst.txt	29040	0644	edit dl rm
gl.rst.txt	6009	0644	edit dl rm
glob.rst.txt	2414	0644	edit dl rm
grp.rst.txt	2256	0644	edit dl rm
gzip.rst.txt	4828	0644	edit dl rm
hashlib.rst.txt	7379	0644	edit dl rm
heapq.rst.txt	13185	0644	edit dl rm
hmac.rst.txt	3073	0644	edit dl rm
hotshot.rst.txt	4289	0644	edit dl rm
htmllib.rst.txt	7379	0644	edit dl rm
htmlparser.rst.txt	11640	0644	edit dl rm
httplib.rst.txt	37454	0644	edit dl rm
i18n.rst.txt	409	0644	edit dl rm
ic.rst.txt	5005	0644	edit dl rm
idle.rst.txt	22182	0644	edit dl rm
imageop.rst.txt	4001	0644	edit dl rm
imaplib.rst.txt	17221	0644	edit dl rm
imgfile.rst.txt	2765	0644	edit dl rm
imghdr.rst.txt	2635	0644	edit dl rm
imp.rst.txt	12593	0644	edit dl rm
importlib.rst.txt	1126	0644	edit dl rm
imputil.rst.txt	7023	0644	edit dl rm
index.rst.txt	2287	0644	edit dl rm
inspect.rst.txt	28151	0644	edit dl rm
internet.rst.txt	950	0644	edit dl rm
intro.rst.txt	2803	0644	edit dl rm
io.rst.txt	39015	0644	edit dl rm
ipc.rst.txt	630	0644	edit dl rm
itertools.rst.txt	36324	0644	edit dl rm
jpeg.rst.txt	3858	0644	edit dl rm
json.rst.txt	25545	0644	edit dl rm
keyword.rst.txt	617	0644	edit dl rm
language.rst.txt	523	0644	edit dl rm
linecache.rst.txt	1887	0644	edit dl rm
locale.rst.txt	24975	0644	edit dl rm
logging.config.rst.txt	31560	0644	edit dl rm
logging.handlers.rst.txt	28153	0644	edit dl rm
logging.rst.txt	46882	0644	edit dl rm
mac.rst.txt	791	0644	edit dl rm
macos.rst.txt	3824	0644	edit dl rm
macosa.rst.txt	3964	0644	edit dl rm
macostools.rst.txt	4017	0644	edit dl rm
macpath.rst.txt	650	0644	edit dl rm
mailbox.rst.txt	68129	0644	edit dl rm
mailcap.rst.txt	3675	0644	edit dl rm
markup.rst.txt	1249	0644	edit dl rm
marshal.rst.txt	5689	0644	edit dl rm
math.rst.txt	10920	0644	edit dl rm
md5.rst.txt	2815	0644	edit dl rm
mhlib.rst.txt	3966	0644	edit dl rm
mimetools.rst.txt	4504	0644	edit dl rm
mimetypes.rst.txt	9839	0644	edit dl rm
mimewriter.rst.txt	3360	0644	edit dl rm
mimify.rst.txt	3519	0644	edit dl rm
miniaeframe.rst.txt	2564	0644	edit dl rm
misc.rst.txt	248	0644	edit dl rm
mm.rst.txt	447	0644	edit dl rm
mmap.rst.txt	10481	0644	edit dl rm
modulefinder.rst.txt	3380	0644	edit dl rm
modules.rst.txt	382	0644	edit dl rm
msilib.rst.txt	19062	0644	edit dl rm
msvcrt.rst.txt	4346	0644	edit dl rm
multifile.rst.txt	6613	0644	edit dl rm
multiprocessing.rst.txt	92621	0644	edit dl rm
mutex.rst.txt	1939	0644	edit dl rm
netdata.rst.txt	432	0644	edit dl rm
netrc.rst.txt	3119	0644	edit dl rm
new.rst.txt	2653	0644	edit dl rm
nis.rst.txt	2108	0644	edit dl rm
nntplib.rst.txt	14531	0644	edit dl rm
numbers.rst.txt	8007	0644	edit dl rm
numeric.rst.txt	751	0644	edit dl rm
operator.rst.txt	22092	0644	edit dl rm
optparse.rst.txt	77101	0644	edit dl rm
os.path.rst.txt	13094	0644	edit dl rm
os.rst.txt	82580	0644	edit dl rm
ossaudiodev.rst.txt	17309	0644	edit dl rm
othergui.rst.txt	2721	0644	edit dl rm
parser.rst.txt	15385	0644	edit dl rm
pdb.rst.txt	16043	0644	edit dl rm
persistence.rst.txt	826	0644	edit dl rm
pickle.rst.txt	37262	0644	edit dl rm
pickletools.rst.txt	1997	0644	edit dl rm
pipes.rst.txt	3786	0644	edit dl rm
pkgutil.rst.txt	7714	0644	edit dl rm
platform.rst.txt	9554	0644	edit dl rm
plistlib.rst.txt	4134	0644	edit dl rm
popen2.rst.txt	7022	0644	edit dl rm
poplib.rst.txt	6220	0644	edit dl rm
posix.rst.txt	3630	0644	edit dl rm
posixfile.rst.txt	7200	0644	edit dl rm
pprint.rst.txt	9071	0644	edit dl rm
profile.rst.txt	28666	0644	edit dl rm
pty.rst.txt	1762	0644	edit dl rm
pwd.rst.txt	2725	0644	edit dl rm
pyclbr.rst.txt	3296	0644	edit dl rm
pydoc.rst.txt	4083	0644	edit dl rm
pyexpat.rst.txt	28891	0644	edit dl rm
python.rst.txt	514	0644	edit dl rm
py_compile.rst.txt	2479	0644	edit dl rm
queue.rst.txt	7034	0644	edit dl rm
quopri.rst.txt	2670	0644	edit dl rm
random.rst.txt	13319	0644	edit dl rm
re.rst.txt	55102	0644	edit dl rm
readline.rst.txt	10513	0644	edit dl rm
repr.rst.txt	4718	0644	edit dl rm
resource.rst.txt	9595	0644	edit dl rm
restricted.rst.txt	3327	0644	edit dl rm
rexec.rst.txt	11742	0644	edit dl rm
rfc822.rst.txt	14037	0644	edit dl rm
rlcompleter.rst.txt	2494	0644	edit dl rm
robotparser.rst.txt	2190	0644	edit dl rm
runpy.rst.txt	6938	0644	edit dl rm
sched.rst.txt	4644	0644	edit dl rm
scrolledtext.rst.txt	1379	0644	edit dl rm
select.rst.txt	20705	0644	edit dl rm
sets.rst.txt	14973	0644	edit dl rm
sgi.rst.txt	322	0644	edit dl rm
sgmllib.rst.txt	10664	0644	edit dl rm
sha.rst.txt	2807	0644	edit dl rm
shelve.rst.txt	8319	0644	edit dl rm
shlex.rst.txt	11313	0644	edit dl rm
shutil.rst.txt	13491	0644	edit dl rm
signal.rst.txt	10719	0644	edit dl rm
simplehttpserver.rst.txt	4559	0644	edit dl rm
simplexmlrpcserver.rst.txt	10881	0644	edit dl rm
site.rst.txt	7880	0644	edit dl rm
smtpd.rst.txt	2464	0644	edit dl rm
smtplib.rst.txt	14906	0644	edit dl rm
sndhdr.rst.txt	1759	0644	edit dl rm
socket.rst.txt	40765	0644	edit dl rm
socketserver.rst.txt	22512	0644	edit dl rm
someos.rst.txt	599	0644	edit dl rm
spwd.rst.txt	2825	0644	edit dl rm
sqlite3.rst.txt	35448	0644	edit dl rm
ssl.rst.txt	76554	0644	edit dl rm
stat.rst.txt	7778	0644	edit dl rm
statvfs.rst.txt	1300	0644	edit dl rm
stdtypes.rst.txt	122668	0644	edit dl rm
string.rst.txt	44085	0644	edit dl rm
stringio.rst.txt	4166	0644	edit dl rm
stringprep.rst.txt	4238	0644	edit dl rm
strings.rst.txt	746	0644	edit dl rm
struct.rst.txt	17100	0644	edit dl rm
subprocess.rst.txt	33648	0644	edit dl rm
sun.rst.txt	249	0644	edit dl rm
sunau.rst.txt	7124	0644	edit dl rm
sunaudio.rst.txt	5849	0644	edit dl rm
symbol.rst.txt	975	0644	edit dl rm
symtable.rst.txt	5064	0644	edit dl rm
sys.rst.txt	47520	0644	edit dl rm
sysconfig.rst.txt	7639	0644	edit dl rm
syslog.rst.txt	3931	0644	edit dl rm
tabnanny.rst.txt	1999	0644	edit dl rm
tarfile.rst.txt	28214	0644	edit dl rm
telnetlib.rst.txt	7482	0644	edit dl rm
tempfile.rst.txt	10504	0644	edit dl rm
termios.rst.txt	3733	0644	edit dl rm
test.rst.txt	17659	0644	edit dl rm
textwrap.rst.txt	8552	0644	edit dl rm
thread.rst.txt	6588	0644	edit dl rm
threading.rst.txt	32468	0644	edit dl rm
time.rst.txt	26020	0644	edit dl rm
timeit.rst.txt	11598	0644	edit dl rm
tix.rst.txt	22693	0644	edit dl rm
tk.rst.txt	1612	0644	edit dl rm
tkinter.rst.txt	33456	0644	edit dl rm
token.rst.txt	2451	0644	edit dl rm
tokenize.rst.txt	5570	0644	edit dl rm
trace.rst.txt	6724	0644	edit dl rm
traceback.rst.txt	10711	0644	edit dl rm
ttk.rst.txt	57411	0644	edit dl rm
tty.rst.txt	1011	0644	edit dl rm
turtle.rst.txt	64097	0644	edit dl rm
types.rst.txt	6200	0644	edit dl rm
undoc.rst.txt	6550	0644	edit dl rm
unicodedata.rst.txt	5736	0644	edit dl rm
unittest.rst.txt	82952	0644	edit dl rm
unix.rst.txt	490	0644	edit dl rm
urllib.rst.txt	24960	0644	edit dl rm
urllib2.rst.txt	35211	0644	edit dl rm
urlparse.rst.txt	16071	0644	edit dl rm
user.rst.txt	2748	0644	edit dl rm
userdict.rst.txt	9290	0644	edit dl rm
uu.rst.txt	2369	0644	edit dl rm
uuid.rst.txt	8378	0644	edit dl rm
warnings.rst.txt	19815	0644	edit dl rm
wave.rst.txt	5047	0644	edit dl rm
weakref.rst.txt	12926	0644	edit dl rm
webbrowser.rst.txt	9863	0644	edit dl rm
whichdb.rst.txt	931	0644	edit dl rm
windows.rst.txt	273	0644	edit dl rm
winsound.rst.txt	5066	0644	edit dl rm
wsgiref.rst.txt	30567	0644	edit dl rm
xdrlib.rst.txt	8077	0644	edit dl rm
xml.dom.minidom.rst.txt	11208	0644	edit dl rm
xml.dom.pulldom.rst.txt	1571	0644	edit dl rm
xml.dom.rst.txt	40182	0644	edit dl rm
xml.etree.elementtree.rst.txt	35707	0644	edit dl rm
xml.rst.txt	6090	0644	edit dl rm
xml.sax.handler.rst.txt	15371	0644	edit dl rm
xml.sax.reader.rst.txt	12257	0644	edit dl rm
xml.sax.rst.txt	6460	0644	edit dl rm
xml.sax.utils.rst.txt	3560	0644	edit dl rm
xmlrpclib.rst.txt	22559	0644	edit dl rm
zipfile.rst.txt	18871	0644	edit dl rm
zipimport.rst.txt	5957	0644	edit dl rm
zlib.rst.txt	12766	0644	edit dl rm
_winreg.rst.txt	23305	0644	edit dl rm
__builtin__.rst.txt	1494	0644	edit dl rm
__future__.rst.txt	4952	0644	edit dl rm
__main__.rst.txt	535	0644	edit dl rm

Edit: /usr/share/doc/python2-docs/html/_sources/library/dis.rst.txt (23248B)

:mod:`dis` --- Disassembler for Python bytecode
===============================================

.. module:: dis
   :synopsis: Disassembler for Python bytecode.

**Source code:** :source:`Lib/dis.py`

--------------

The :mod:`dis` module supports the analysis of CPython :term:`bytecode` by
disassembling it. The CPython bytecode which this module takes as an input is
defined in the file :file:`Include/opcode.h` and used by the compiler and the
interpreter.

.. impl-detail::

Bytecode is an implementation detail of the CPython interpreter!  No
   guarantees are made that bytecode will not be added, removed, or changed
   between versions of Python.  Use of this module should not be considered to
   work across Python VMs or Python releases.

Example: Given the function :func:`myfunc`::

def myfunc(alist):
       return len(alist)

the following command can be used to get the disassembly of :func:`myfunc`::

>>> dis.dis(myfunc)
     2           0 LOAD_GLOBAL              0 (len)
                 3 LOAD_FAST                0 (alist)
                 6 CALL_FUNCTION            1
                 9 RETURN_VALUE

(The "2" is a line number).

The :mod:`dis` module defines the following functions and constants:

.. function:: dis([bytesource])

Disassemble the *bytesource* object. *bytesource* can denote either a module,
   a class, a method, a function, or a code object.  For a module, it
   disassembles all functions.  For a class, it disassembles all methods.  For a
   single code sequence, it prints one line per bytecode instruction.  If no
   object is provided, it disassembles the last traceback.

.. function:: distb([tb])

Disassembles the top-of-stack function of a traceback, using the last
   traceback if none was passed.  The instruction causing the exception is
   indicated.

.. function:: disassemble(code[, lasti])

Disassembles a code object, indicating the last instruction if *lasti* was
   provided.  The output is divided in the following columns:

#. the line number, for the first instruction of each line
   #. the current instruction, indicated as ``-->``,
   #. a labelled instruction, indicated with ``>>``,
   #. the address of the instruction,
   #. the operation code name,
   #. operation parameters, and
   #. interpretation of the parameters in parentheses.

The parameter interpretation recognizes local and global variable names,
   constant values, branch targets, and compare operators.

.. function:: disco(code[, lasti])

A synonym for :func:`disassemble`.  It is more convenient to type, and kept
   for compatibility with earlier Python releases.

.. function:: findlinestarts(code)

This generator function uses the ``co_firstlineno`` and ``co_lnotab``
   attributes of the code object *code* to find the offsets which are starts of
   lines in the source code.  They are generated as ``(offset, lineno)`` pairs.

.. function:: findlabels(code)

Detect all offsets in the code object *code* which are jump targets, and
   return a list of these offsets.

.. data:: opname

Sequence of operation names, indexable using the bytecode.

.. data:: opmap

Dictionary mapping operation names to bytecodes.

.. data:: cmp_op

Sequence of all compare operation names.

.. data:: hasconst

Sequence of bytecodes that access a constant.

.. data:: hasfree

Sequence of bytecodes that access a free variable.

.. data:: hasname

Sequence of bytecodes that access an attribute by name.

.. data:: hasjrel

Sequence of bytecodes that have a relative jump target.

.. data:: hasjabs

Sequence of bytecodes that have an absolute jump target.

.. data:: haslocal

Sequence of bytecodes that access a local variable.

.. data:: hascompare

Sequence of bytecodes of Boolean operations.

.. _bytecodes:

Python Bytecode Instructions
----------------------------

The Python compiler currently generates the following bytecode instructions.

.. opcode:: STOP_CODE ()

Indicates end-of-code to the compiler, not used by the interpreter.

.. opcode:: NOP ()

Do nothing code.  Used as a placeholder by the bytecode optimizer.

.. opcode:: POP_TOP ()

Removes the top-of-stack (TOS) item.

.. opcode:: ROT_TWO ()

Swaps the two top-most stack items.

.. opcode:: ROT_THREE ()

Lifts second and third stack item one position up, moves top down to position
   three.

.. opcode:: ROT_FOUR ()

Lifts second, third and forth stack item one position up, moves top down to
   position four.

.. opcode:: DUP_TOP ()

Duplicates the reference on top of the stack.

Unary Operations take the top of the stack, apply the operation, and push the
result back on the stack.

.. opcode:: UNARY_POSITIVE ()

Implements ``TOS = +TOS``.

.. opcode:: UNARY_NEGATIVE ()

Implements ``TOS = -TOS``.

.. opcode:: UNARY_NOT ()

Implements ``TOS = not TOS``.

.. opcode:: UNARY_CONVERT ()

Implements ``TOS = `TOS```.

.. opcode:: UNARY_INVERT ()

Implements ``TOS = ~TOS``.

.. opcode:: GET_ITER ()

Implements ``TOS = iter(TOS)``.

Binary operations remove the top of the stack (TOS) and the second top-most
stack item (TOS1) from the stack.  They perform the operation, and put the
result back on the stack.

.. opcode:: BINARY_POWER ()

Implements ``TOS = TOS1 ** TOS``.

.. opcode:: BINARY_MULTIPLY ()

Implements ``TOS = TOS1 * TOS``.

.. opcode:: BINARY_DIVIDE ()

Implements ``TOS = TOS1 / TOS`` when ``from __future__ import division`` is
   not in effect.

.. opcode:: BINARY_FLOOR_DIVIDE ()

Implements ``TOS = TOS1 // TOS``.

.. opcode:: BINARY_TRUE_DIVIDE ()

Implements ``TOS = TOS1 / TOS`` when ``from __future__ import division`` is
   in effect.

.. opcode:: BINARY_MODULO ()

Implements ``TOS = TOS1 % TOS``.

.. opcode:: BINARY_ADD ()

Implements ``TOS = TOS1 + TOS``.

.. opcode:: BINARY_SUBTRACT ()

Implements ``TOS = TOS1 - TOS``.

.. opcode:: BINARY_SUBSCR ()

Implements ``TOS = TOS1[TOS]``.

.. opcode:: BINARY_LSHIFT ()

Implements ``TOS = TOS1 << TOS``.

.. opcode:: BINARY_RSHIFT ()

Implements ``TOS = TOS1 >> TOS``.

.. opcode:: BINARY_AND ()

Implements ``TOS = TOS1 & TOS``.

.. opcode:: BINARY_XOR ()

Implements ``TOS = TOS1 ^ TOS``.

.. opcode:: BINARY_OR ()

Implements ``TOS = TOS1 | TOS``.

In-place operations are like binary operations, in that they remove TOS and
TOS1, and push the result back on the stack, but the operation is done in-place
when TOS1 supports it, and the resulting TOS may be (but does not have to be)
the original TOS1.

.. opcode:: INPLACE_POWER ()

Implements in-place ``TOS = TOS1 ** TOS``.

.. opcode:: INPLACE_MULTIPLY ()

Implements in-place ``TOS = TOS1 * TOS``.

.. opcode:: INPLACE_DIVIDE ()

Implements in-place ``TOS = TOS1 / TOS`` when ``from __future__ import
   division`` is not in effect.

.. opcode:: INPLACE_FLOOR_DIVIDE ()

Implements in-place ``TOS = TOS1 // TOS``.

.. opcode:: INPLACE_TRUE_DIVIDE ()

Implements in-place ``TOS = TOS1 / TOS`` when ``from __future__ import
   division`` is in effect.

.. opcode:: INPLACE_MODULO ()

Implements in-place ``TOS = TOS1 % TOS``.

.. opcode:: INPLACE_ADD ()

Implements in-place ``TOS = TOS1 + TOS``.

.. opcode:: INPLACE_SUBTRACT ()

Implements in-place ``TOS = TOS1 - TOS``.

.. opcode:: INPLACE_LSHIFT ()

Implements in-place ``TOS = TOS1 << TOS``.

.. opcode:: INPLACE_RSHIFT ()

Implements in-place ``TOS = TOS1 >> TOS``.

.. opcode:: INPLACE_AND ()

Implements in-place ``TOS = TOS1 & TOS``.

.. opcode:: INPLACE_XOR ()

Implements in-place ``TOS = TOS1 ^ TOS``.

.. opcode:: INPLACE_OR ()

Implements in-place ``TOS = TOS1 | TOS``.

The slice opcodes take up to three parameters.

.. opcode:: SLICE+0 ()

Implements ``TOS = TOS[:]``.

.. opcode:: SLICE+1 ()

Implements ``TOS = TOS1[TOS:]``.

.. opcode:: SLICE+2 ()

Implements ``TOS = TOS1[:TOS]``.

.. opcode:: SLICE+3 ()

Implements ``TOS = TOS2[TOS1:TOS]``.

Slice assignment needs even an additional parameter.  As any statement, they put
nothing on the stack.

.. opcode:: STORE_SLICE+0 ()

Implements ``TOS[:] = TOS1``.

.. opcode:: STORE_SLICE+1 ()

Implements ``TOS1[TOS:] = TOS2``.

.. opcode:: STORE_SLICE+2 ()

Implements ``TOS1[:TOS] = TOS2``.

.. opcode:: STORE_SLICE+3 ()

Implements ``TOS2[TOS1:TOS] = TOS3``.

.. opcode:: DELETE_SLICE+0 ()

Implements ``del TOS[:]``.

.. opcode:: DELETE_SLICE+1 ()

Implements ``del TOS1[TOS:]``.

.. opcode:: DELETE_SLICE+2 ()

Implements ``del TOS1[:TOS]``.

.. opcode:: DELETE_SLICE+3 ()

Implements ``del TOS2[TOS1:TOS]``.

.. opcode:: STORE_SUBSCR ()

Implements ``TOS1[TOS] = TOS2``.

.. opcode:: DELETE_SUBSCR ()

Implements ``del TOS1[TOS]``.

Miscellaneous opcodes.

.. opcode:: PRINT_EXPR ()

Implements the expression statement for the interactive mode.  TOS is removed
   from the stack and printed.  In non-interactive mode, an expression statement
   is terminated with :opcode:`POP_TOP`.

.. opcode:: PRINT_ITEM ()

Prints TOS to the file-like object bound to ``sys.stdout``.  There is one
   such instruction for each item in the :keyword:`print` statement.

.. opcode:: PRINT_ITEM_TO ()

Like ``PRINT_ITEM``, but prints the item second from TOS to the file-like
   object at TOS.  This is used by the extended print statement.

.. opcode:: PRINT_NEWLINE ()

Prints a new line on ``sys.stdout``.  This is generated as the last operation
   of a :keyword:`print` statement, unless the statement ends with a comma.

.. opcode:: PRINT_NEWLINE_TO ()

Like ``PRINT_NEWLINE``, but prints the new line on the file-like object on
   the TOS.  This is used by the extended print statement.

.. opcode:: BREAK_LOOP ()

Terminates a loop due to a :keyword:`break` statement.

.. opcode:: CONTINUE_LOOP (target)

Continues a loop due to a :keyword:`continue` statement.  *target* is the
   address to jump to (which should be a :opcode:`FOR_ITER` instruction).

.. opcode:: LIST_APPEND (i)

Calls ``list.append(TOS[-i], TOS)``.  Used to implement list comprehensions.
   While the appended value is popped off, the list object remains on the stack
   so that it is available for further iterations of the loop.

.. opcode:: LOAD_LOCALS ()

Pushes a reference to the locals of the current scope on the stack. This is
   used in the code for a class definition: After the class body is evaluated,
   the locals are passed to the class definition.

.. opcode:: RETURN_VALUE ()

Returns with TOS to the caller of the function.

.. opcode:: YIELD_VALUE ()

Pops ``TOS`` and yields it from a :term:`generator`.

.. opcode:: IMPORT_STAR ()

Loads all symbols not starting with ``'_'`` directly from the module TOS to
   the local namespace. The module is popped after loading all names. This
   opcode implements ``from module import *``.

.. opcode:: EXEC_STMT ()

Implements ``exec TOS2,TOS1,TOS``.  The compiler fills missing optional
   parameters with ``None``.

.. opcode:: POP_BLOCK ()

Removes one block from the block stack.  Per frame, there is a stack of
   blocks, denoting nested loops, try statements, and such.

.. opcode:: END_FINALLY ()

Terminates a :keyword:`finally` clause.  The interpreter recalls whether the
   exception has to be re-raised, or whether the function returns, and continues
   with the outer-next block.

.. opcode:: BUILD_CLASS ()

Creates a new class object.  TOS is the methods dictionary, TOS1 the tuple of
   the names of the base classes, and TOS2 the class name.

.. opcode:: SETUP_WITH (delta)

This opcode performs several operations before a with block starts.  First,
   it loads :meth:`~object.__exit__` from the context manager and pushes it onto
   the stack for later use by :opcode:`WITH_CLEANUP`.  Then,
   :meth:`~object.__enter__` is called, and a finally block pointing to *delta*
   is pushed.  Finally, the result of calling the enter method is pushed onto
   the stack.  The next opcode will either ignore it (:opcode:`POP_TOP`), or
   store it in (a) variable(s) (:opcode:`STORE_FAST`, :opcode:`STORE_NAME`, or
   :opcode:`UNPACK_SEQUENCE`).

.. opcode:: WITH_CLEANUP ()

Cleans up the stack when a :keyword:`with` statement block exits.  On top of
   the stack are 1--3 values indicating how/why the finally clause was entered:

* TOP = ``None``
   * (TOP, SECOND) = (``WHY_{RETURN,CONTINUE}``), retval
   * TOP = ``WHY_*``; no retval below it
   * (TOP, SECOND, THIRD) = exc_info()

Under them is EXIT, the context manager's :meth:`__exit__` bound method.

In the last case, ``EXIT(TOP, SECOND, THIRD)`` is called, otherwise
   ``EXIT(None, None, None)``.

EXIT is removed from the stack, leaving the values above it in the same
   order. In addition, if the stack represents an exception, *and* the function
   call returns a 'true' value, this information is "zapped", to prevent
   ``END_FINALLY`` from re-raising the exception.  (But non-local gotos should
   still be resumed.)

.. XXX explain the WHY stuff!

All of the following opcodes expect arguments.  An argument is two bytes, with
the more significant byte last.

.. opcode:: STORE_NAME (namei)

Implements ``name = TOS``. *namei* is the index of *name* in the attribute
   :attr:`co_names` of the code object. The compiler tries to use ``STORE_FAST``
   or ``STORE_GLOBAL`` if possible.

.. opcode:: DELETE_NAME (namei)

Implements ``del name``, where *namei* is the index into :attr:`co_names`
   attribute of the code object.

.. opcode:: UNPACK_SEQUENCE (count)

Unpacks TOS into *count* individual values, which are put onto the stack
   right-to-left.

.. opcode:: DUP_TOPX (count)

Duplicate *count* items, keeping them in the same order. Due to
   implementation limits, *count* should be between 1 and 5 inclusive.

.. opcode:: STORE_ATTR (namei)

Implements ``TOS.name = TOS1``, where *namei* is the index of name in
   :attr:`co_names`.

.. opcode:: DELETE_ATTR (namei)

Implements ``del TOS.name``, using *namei* as index into :attr:`co_names`.

.. opcode:: STORE_GLOBAL (namei)

Works as ``STORE_NAME``, but stores the name as a global.

.. opcode:: DELETE_GLOBAL (namei)

Works as ``DELETE_NAME``, but deletes a global name.

.. opcode:: LOAD_CONST (consti)

Pushes ``co_consts[consti]`` onto the stack.

.. opcode:: LOAD_NAME (namei)

Pushes the value associated with ``co_names[namei]`` onto the stack.

.. opcode:: BUILD_TUPLE (count)

Creates a tuple consuming *count* items from the stack, and pushes the
   resulting tuple onto the stack.

.. opcode:: BUILD_LIST (count)

Works as ``BUILD_TUPLE``, but creates a list.

.. opcode:: BUILD_SET (count)

Works as ``BUILD_TUPLE``, but creates a set.

.. versionadded:: 2.7

.. opcode:: BUILD_MAP (count)

Pushes a new dictionary object onto the stack.  The dictionary is pre-sized
   to hold *count* entries.

.. opcode:: LOAD_ATTR (namei)

Replaces TOS with ``getattr(TOS, co_names[namei])``.

.. opcode:: COMPARE_OP (opname)

Performs a Boolean operation.  The operation name can be found in
   ``cmp_op[opname]``.

.. opcode:: IMPORT_NAME (namei)

Imports the module ``co_names[namei]``.  TOS and TOS1 are popped and provide
   the *fromlist* and *level* arguments of :func:`__import__`.  The module
   object is pushed onto the stack.  The current namespace is not affected: for
   a proper import statement, a subsequent ``STORE_FAST`` instruction modifies
   the namespace.

.. opcode:: IMPORT_FROM (namei)

Loads the attribute ``co_names[namei]`` from the module found in TOS. The
   resulting object is pushed onto the stack, to be subsequently stored by a
   ``STORE_FAST`` instruction.

.. opcode:: JUMP_FORWARD (delta)

Increments bytecode counter by *delta*.

.. opcode:: POP_JUMP_IF_TRUE (target)

If TOS is true, sets the bytecode counter to *target*.  TOS is popped.

.. opcode:: POP_JUMP_IF_FALSE (target)

If TOS is false, sets the bytecode counter to *target*.  TOS is popped.

.. opcode:: JUMP_IF_TRUE_OR_POP (target)

If TOS is true, sets the bytecode counter to *target* and leaves TOS on the
   stack.  Otherwise (TOS is false), TOS is popped.

.. opcode:: JUMP_IF_FALSE_OR_POP (target)

If TOS is false, sets the bytecode counter to *target* and leaves TOS on the
   stack.  Otherwise (TOS is true), TOS is popped.

.. opcode:: JUMP_ABSOLUTE (target)

Set bytecode counter to *target*.

.. opcode:: FOR_ITER (delta)

``TOS`` is an :term:`iterator`.  Call its :meth:`!next` method.  If this
   yields a new value, push it on the stack (leaving the iterator below it).  If
   the iterator indicates it is exhausted ``TOS`` is popped, and the bytecode
   counter is incremented by *delta*.

.. opcode:: LOAD_GLOBAL (namei)

Loads the global named ``co_names[namei]`` onto the stack.

.. opcode:: SETUP_LOOP (delta)

Pushes a block for a loop onto the block stack.  The block spans from the
   current instruction with a size of *delta* bytes.

.. opcode:: SETUP_EXCEPT (delta)

Pushes a try block from a try-except clause onto the block stack. *delta*
   points to the first except block.

.. opcode:: SETUP_FINALLY (delta)

Pushes a try block from a try-except clause onto the block stack. *delta*
   points to the finally block.

.. opcode:: STORE_MAP ()

Store a key and value pair in a dictionary.  Pops the key and value while
   leaving the dictionary on the stack.

.. opcode:: LOAD_FAST (var_num)

Pushes a reference to the local ``co_varnames[var_num]`` onto the stack.

.. opcode:: STORE_FAST (var_num)

Stores TOS into the local ``co_varnames[var_num]``.

.. opcode:: DELETE_FAST (var_num)

Deletes local ``co_varnames[var_num]``.

.. opcode:: LOAD_CLOSURE (i)

Pushes a reference to the cell contained in slot *i* of the cell and free
   variable storage.  The name of the variable is ``co_cellvars[i]`` if *i* is
   less than the length of *co_cellvars*.  Otherwise it is ``co_freevars[i -
   len(co_cellvars)]``.

.. opcode:: LOAD_DEREF (i)

Loads the cell contained in slot *i* of the cell and free variable storage.
   Pushes a reference to the object the cell contains on the stack.

.. opcode:: STORE_DEREF (i)

Stores TOS into the cell contained in slot *i* of the cell and free variable
   storage.

.. opcode:: SET_LINENO (lineno)

This opcode is obsolete.

.. opcode:: RAISE_VARARGS (argc)

Raises an exception. *argc* indicates the number of arguments to the raise
   statement, ranging from 0 to 3.  The handler will find the traceback as TOS2,
   the parameter as TOS1, and the exception as TOS.

.. opcode:: CALL_FUNCTION (argc)

Calls a callable object.  The low byte of *argc* indicates the number of
   positional arguments, the high byte the number of keyword arguments.
   The stack contains keyword arguments on top (if any), then the positional
   arguments below that (if any), then the callable object to call below that.
   Each keyword argument is represented with two values on the stack:
   the argument's name, and its value, with the argument's value above the
   name on the stack.
   The positional arguments are pushed in the order that they are passed in
   to the callable object, with the right-most positional argument on top.
   ``CALL_FUNCTION`` pops all arguments and the callable object off the stack,
   calls the callable object with those arguments, and pushes the return value
   returned by the callable object.

.. opcode:: MAKE_FUNCTION (argc)

Pushes a new function object on the stack.  TOS is the code associated with
   the function.  The function object is defined to have *argc* default
   parameters, which are found below TOS.

.. opcode:: MAKE_CLOSURE (argc)

Creates a new function object, sets its *func_closure* slot, and pushes it on
   the stack.  TOS is the code associated with the function, TOS1 the tuple
   containing cells for the closure's free variables.  The function also has
   *argc* default parameters, which are found below the cells.

.. opcode:: BUILD_SLICE (argc)

.. index:: builtin: slice

Pushes a slice object on the stack.  *argc* must be 2 or 3.  If it is 2,
   ``slice(TOS1, TOS)`` is pushed; if it is 3, ``slice(TOS2, TOS1, TOS)`` is
   pushed. See the :func:`slice` built-in function for more information.

.. opcode:: EXTENDED_ARG (ext)

Prefixes any opcode which has an argument too big to fit into the default two
   bytes.  *ext* holds two additional bytes which, taken together with the
   subsequent opcode's argument, comprise a four-byte argument, *ext* being the
   two most-significant bytes.

.. opcode:: CALL_FUNCTION_VAR (argc)

Calls a callable object, similarly to :opcode:`CALL_FUNCTION`.
   *argc* represents the number of keyword and positional
   arguments, identically to :opcode:`CALL_FUNCTION`.
   The top of the stack contains an iterable object containing
   additional positional arguments.
   Below that are keyword arguments (if any), positional arguments (if any)
   and a callable object, identically to :opcode:`CALL_FUNCTION`.
   Before the callable object is called, the iterable object
   is "unpacked" and its contents are appended to the positional
   arguments passed in.
   The iterable object is ignored when computing
   the value of ``argc``.

.. opcode:: CALL_FUNCTION_KW (argc)

Calls a callable object, similarly to :opcode:`CALL_FUNCTION`.
   *argc* represents the number of keyword and positional
   arguments, identically to :opcode:`CALL_FUNCTION`.
   The top of the stack contains a mapping object containing additional keyword
   arguments.
   Below that are keyword arguments (if any), positional arguments (if any)
   and a callable object, identically to :opcode:`CALL_FUNCTION`.
   Before the callable is called, the mapping object at the top of the stack is
   "unpacked" and its contents are appended to the keyword arguments passed in.
   The mapping object at the top of the stack is ignored when computing
   the value of ``argc``.

.. opcode:: CALL_FUNCTION_VAR_KW (argc)

Calls a callable object, similarly to :opcode:`CALL_FUNCTION_VAR` and
   :opcode:`CALL_FUNCTION_KW`.
   *argc* represents the number of keyword and positional
   arguments, identically to :opcode:`CALL_FUNCTION`.
   The top of the stack contains a mapping object, as per
   :opcode:`CALL_FUNCTION_KW`.
   Below that is an iterable object, as per
   :opcode:`CALL_FUNCTION_VAR`.
   Below that are keyword arguments (if any), positional arguments (if any)
   and a callable object, identically to :opcode:`CALL_FUNCTION`.
   Before the callable is called, the mapping object and iterable object
   are each "unpacked" and their contents passed in as keyword and
   positional arguments respectively,
   identically to :opcode:`CALL_FUNCTION_VAR` and :opcode:`CALL_FUNCTION_KW`.
   The mapping object and iterable object are both ignored when computing
   the value of ``argc``.

.. opcode:: HAVE_ARGUMENT ()

This is not really an opcode.  It identifies the dividing line between
   opcodes which don't take arguments ``< HAVE_ARGUMENT`` and those which do
   ``>= HAVE_ARGUMENT``.

cmd: